Bunn MHG Series User Manual

MHG
Multi-Hopper Grinder and Storage System for use with Smart Funnel
®
36529.0001 H 05/19 © 2011 Bunn-O-Matic Corporation
INSTALLATION AND OPERATING GUIDE
Bunn-O-Matic Corporation
Post Office Box 3227, Springfield, Illinois 62708-3227
Phone (217) 529-6601 | Fax (217) 529-6644
www.bunn.com
To ensure you have the latest revision of the Operating Manual, or to view the Illustrated Parts Catalog, Programming Manual, or
Service Manual, please visit the Bunn-O-Matic website, at www.bunn.com. This is absolutely FREE, and the quickest way to obtain
the latest catalog and manual updates. For Technical Service, contact Bunn-O-Matic Corporation at 1-800-286-6070.

Bunn MHG Series Specifications

General

Brand	Bunn
Model	MHG Series
Category	Grinder
Language	English

Summary

Introduction

User Notices

Electrical Safety Warning

Warning about using properly protected circuits, grounding, and electrical codes.

Personal Injury Hazard Warning

Caution to keep fingers and foreign objects out of hopper/chute.

Shock Hazard Warning

Warning about opening covers and servicing by authorized personnel only.

North American Requirements

CE Requirements

Electrical Requirements

Initial Set-Up and Programming

Operating Controls

Grind Pad

Pressing initiates a grind cycle.

Stop Pad

Pressing ends the operation of the grinder.

Navigation Pads

Buttons used to navigate setup and programming menus.

Hopper/Batch Selector Pads

Select small, medium, or large batch size from specific hoppers.

Name Hopper

Modify Recipes

Coffee Grinding

Adjustments

Burr Adjustment

Procedure to adjust the grinder burrs for desired fineness.

Fine Grind Setting

Rotate adjusting screw 7 hash marks counterclockwise.

Drip Grind Setting

Rotate adjusting screw 8 hash marks counterclockwise.

Regular (Coarse) Grind Setting

Rotate adjusting screw 12 hash marks counterclockwise.

Cleaning

Preventive Maintenance