5
CLEANING - continued
5. Clean the inlet tube with the supplied brush (00675.0000) using the
cleaning product solution.
6. Press down on the sight gauge top (as shown) to release the sight
gauge tube.
7. Remove sight gauge tube and bottom seal.
8. Clean the sight gauge tube using provided brush.
9. Turn the faucet wingnut in a counter-clockwise direction, and remove
the faucet from the dispenser. Unscrew the faucet cap from the
faucet body, then disassemble the faucet parts.
10. Transfer all the faucet parts to a three compartment sink for cleaning.
Fill the first sink with a soap solution using a mild detergent, the
second sink is used for clean rinse (Hot Water), and the third is used
for a sanitizer solution (75° F warm water and approved sanitizer).
53431.1 030617
To Next Page
Loading...
