10
FIG. 2
54923 032714
BATTERY REPLACEMENT
The Digital Sight Gauge lid comes equipped with 4 AAA batteries. The batteries have
a use life of approximately 1
1
/
2
years under normal operating conditions.
NOTE: Batteries are not covered under product warranty.
To replace the batteries:
1. Remove the lid assembly from the server.
2. Remove the two screws and cover on bottom of the lid, Fig 2.
3. Replace used batteries with 4 AAA alkaline batteries.
4. Replace cover and two screws.
5. Replace lid assembly.
To Previous Page
Loading...
Need help?
General
