LOWLANDER MK4 MANURE SPREADER – INSTRUCTION & SPARES MANUAL
1.2 Coupling of hydraulic hoses.
Fit the two hoses for the floor drive hydraulic motor (one to feed and one for return) to
double spool valve on tractor. Choose position of spool lever for ease of control to
obtain floor movement to rear. Reversing of floor is done by selecting the opposite
position of the hydraulic control lever. Universal quick release probes are fitted as
standard to hose ends. Mark hose as required to assist in the future coupling for correct
position of feed and return. When a slurry door is fitted connect the hydraulic hoses to
a double spool valve and select the hose positions to suit the operator to open and close
the door.
Fit hydrualic brake hose to trailer brake valve on tractor (male fitting).
A universal female brake coupling is fitted as standard to the hose ends.
N.B CHECK DIRECTION OF FLOOR BEFORE LOADING.
Do not run floor in reverse with full load. Speed of floor in reverse is at MAXIMUM.
Only reverse floor for a few seconds.
Ensure the braking system is connected and that it functions correctly before moving.
To Next Page
Loading...
