LOWLANDER MK4 MANURE SPREADER – INSTRUCTION & SPARES MANUAL
INTRODUCTION
This manual provides information on the use, adjustment and servicing of the GT Bunning range
of Lowlander spreader.
Following the advice on the correct maintenance and servicing procedures will ensure maximum
performance and a long service life of your machine.
Failure to carry out maintenance work correctly or incorrect operation will result in poor
machine efficiency and loss of valuable time.
By ensuring the correct operation, and by carrying out maintenance and service work with care,
you will be able to make full use of the technical knowledge and the experience with which your
Lowlander spreader was originally designed.
DISPOSAL
Upon completion of the useful life of the machine, all parts can be disposed of at a suitable
waste disposal facility.
Care must be taken if oxy-acetylene cutting equipment is to be used.
The wheels and tyres, hydraulic cylinders, valves and hoses must be removed before using
cutting equipment.
Oil must be drained collected and disposed of in accordance with current legislation.
Electrical components must be disposed of in accordance with the relevant legislation.
To Next Page
Loading...
