LOWLANDER MK4 MANURE SPREADER – INSTRUCTION & SPARES MANUAL
12. WARRANTY
During the 3 year warranty period any failures which occur due to faulty components or
workmanship must be reported to G.T. Bunning & Sons Ltd before any repairs or
replacements of components is carried out. The warranty period commences on the
despatch date from the factory. All parts not guaranteed by G.T. Bunning & Sons Ltd are
covered by the component manufacturer and are subject to their own warranty. The
warranty terms only apply to machines that have been subject to fair wear and tear
operation and where routine maintenance has been carried out.
13. IMPORTANT INFORMATION
When using the speader in conjunction with a tractor which has a fast and slow
response control on the spool valves, check that the control on the spool valve is not in
the slow position in respect of the floor drives, as this will over ride the variable floor
speed.
The spreader always runs very quietly when working, if loud banging noises are heard
this will mean that foreign objects are in the material. Obviously the shearbolt may well
break. If the shearbolts on the PTO has not sheared and the noises persists STOP THE
SPREADER SWITCH OFF TRACTOR ENGINE and check the spreader.
From new, it is strongly recommended that you do not use a high pressure cold washer
and definatley not a hot pressure washer to the outside of the spreader for 12 weeks.
This will damage the paintwork whilst normal curing of the paint takes place.
Careful low pressure washing is acceptable.
Do not let manure dry and set on fresh paint for the first 3-4 weeks. During this period
it is advisable to clean the machine after use as instructed.