BUNNING Lowlander MK4 - Page 36

LOWLANDER MK4 MANURE SPREADER – INSTRUCTION & SPARES MANUAL
Page
36
4.1 SHREDDING AUGERS MK4 PARTS LIST
KEY QTY PART No. DESCRIPTION
1 1 B1021 AUGER R.H 75/85/90
1 B1031 AUGER R.H 105/105C/120/150/150C
2 1 B1020 AUGER L.H 75/85/90
1 B1030 AUGER L.H 105/105C/120/150/150C
3 2 B1152 DRIVE FLANGE
4 12 B1142 RUBBER DRIVE BLOCK
5 3 B1122 BLADE BORON EACH AUGER
6 44 B1102 CUTTER 75/85/90 BORON
56 B1102 CUTTER 105/105C/120/150 BORON
7 100 B1107 BOLT & NUT M14x40 FINE
124 B1107 BOLT & NUT M14x40 FINE
8 2 B1178/1 BEARING M50
9 2 B1193 BEARING COVER M50
10 2 B2350 SPACER
11 B1106 ANGLE THROWER - OPTION
13 44 B1098 REINFORCING BAR
14 4 73154 16 x 50 BOLT
NOTE: B1102 FITTED AFTER SEPT 2014 ONLY
B1100/1 FITTED PRE SEPT 2014