What to do if D65, D66 BELT Phase A and BELT Phase B LEDs don't blink on Burford 2300M Industrial Equipment?
If the D65, D66 BELT Phase A and BELT Phase B LEDs are not blinking on your Burford Industrial Equipment, ensure that each LED blinks on and off as the belt motor is rotated back and forth.
What to do if D63, D64 H/S Phase A and H/S Phase B LEDs don't blink on Burford 2300M?
If the D63, D64 H/S Phase A and H/S Phase B LEDs are not blinking on your Burford Industrial Equipment, ensure that each LED blinks on and off as the holder shear motor is rotated back and forth.
What to do if D50, D51 NEEDLE Phase A and NEEDLE Phase B LEDs don't blink on Burford 2300M?
If the D50, D51 NEEDLE Phase A and NEEDLE Phase B LEDs are not blinking on your Burford Industrial Equipment, ensure that each LED blinks on and off as the needle is moved back and forth.
What to do if D52, D53 TWISTER Phase A and TWISTER Phase B LEDs don't blink on Burford 2300M Industrial Equipment?
If the D52, D53 TWISTER Phase A and TWISTER Phase B LEDs are not blinking on your Burford Industrial Equipment, ensure that each LED blinks on and off as the twister hook is rotated back and forth.
General| Model | 2300M |
|---|---|
| Category | Industrial Equipment |
| Current | 10A |
| Frequency | 50/60 Hz |
| Weight | 15 kg |
| Operating Temperature | -10°C to 50°C |
| Material | Steel |
To Next Page
