Burke TRI-FLEX II Operating Instructions

14
SYSTEM SET-UP
Figure –1
PLEASE NOTE: Burke Low Air Loss Support System ALTERNATING PRESSURE System
must be installed on bed frames that are equipped with side rails. Please raise side rails
on the bed and lock them in position after the patient is on the mattress.
NEVER LEAVE PATIENT UNATTENDED ON MATTRESS SYSTEM WITH BED SIDE
RAILS IN THE DOWN POSITION.
!
CONTROL UNIT SET-UP
Figure – 2

Burke TRI-FLEX II Specifications

General

Brand	Burke
Model	TRI-FLEX II
Category	Medical Equipment
Language	English