Need help?Do you have a question about the Burkert 8691 REV.3 and is the answer not in the manual?
General| Brand | Burkert |
|---|---|
| Model | 8691 REV.3 |
| Category | Controller |
| Language | English |
Explains warning symbols used in the manual.
Defines key terms like "device" and "büS".
Lists contact details for Bürkert.
Outlines warranty conditions for the device.
Details the structure for integrated pilot air duct variants.
Details the structure for external pilot air duct variants.
Explains the primary function of controlling process valves.
Mentions ATEX and cULus approvals.
Explains the information presented on the device's type label.
Specifies parameters for control medium, pressure, and flow rate.
Details electrical specifications for various communication types.
Provides critical safety guidelines before mechanical installation.
Step-by-step guide for installing the switch spindle.
Procedure for mounting the device onto the actuator.
Step-by-step guide for installing external control air duct models.
Explains alignment for external pilot air duct models.
Describes how to turn the actuator when it has a hexnut.
Describes how to turn the actuator when it lacks a hexnut.
Provides essential safety precautions for pneumatic installation.
Guide on how to connect the device pneumatically.
Crucial safety measures before performing electrical installation.
Instructions for electrical connection using a cable gland.
Guide for electrical connection using IO-Link Port Class A.
Instructions for electrical connection using the büs interface.
Procedure to invert the process valve direction using keys.
Guide to teach functions for setting end positions.
Detailed steps for initiating the automatic teach function.
Procedure to start the manual teach function for devices without pilot valve.
Describes the functions of the device's keys.
Details the AUTOMATIC and MANUAL operating states.
Procedure for switching between MANUAL and AUTO operating states.
Steps to reset the device to factory settings.
Displays valve position status in valve mode.
Displays valve position and error status.
Displays status according to NAMUR NE 107 standard.
Instructions for configuring the LED mode and status indicator.
Procedure for cleaning or replacing the air intake filter.
Critical safety precautions before deinstalling the device.
Step-by-step guide for deinstalling the device.
Lists available accessories and their order numbers.
Guidelines for proper storage to prevent damage.
To Next Page
