Need help?Do you have a question about the Burkert 8605 and is the answer not in the manual?
General| Type | Controller |
|---|---|
| Model | 8605 |
| Manufacturer | Burkert |
| Input Voltage | 24 V DC |
| Protection Class | IP65 |
| Communication | CANopen |
| Inputs | Digital, Analog |
| Outputs | Digital, Analog |
| Operating Temperature | 0 to 50 °C |
| Housing Material | Polycarbonate |
Explains warning symbols like DANGER, WARNING, CAUTION, and NOTE for user guidance.
Describes scenarios of misuse that could lead to device damage or safety hazards.
Details on checking delivery contents for damage and correctness against the delivery note.
Provides contact details for Bürkert Fluid Control Systems in Germany and internationally.
Information regarding warranty terms, limitations, liability, and exclusions.
Links to online resources for operating instructions, data sheets, and documentation.
Describes the intended industrial environments and control engineering fields for the device.
Overview of the digital control electronics for proportional valves and its core function.
Details and features of the cable plug version of the Type 8605 control electronics.
Details and features of the DIN rail mounting version of the Type 8605 control electronics.
Specifies environmental and operational conditions like power supply, temperature, and interference resistance.
Describes the LCD, keys, and display indicators of the operating unit for user interaction.
Details the components of the operating unit and its role in settings and display management.
Explains how the control electronics transforms input signals into output signals for valve control.
Guides on setting key values for effective coil current to adapt the valve's working range.
Provides critical safety warnings to be observed during the installation process.
Details how to make the necessary electrical connections for the device.
Specifics on electrical connection for the cable plug version of the device.
Specifics on electrical connection for the DIN rail mounting version of the device.
Explains the two operating modes: Display mode and Configuration mode.
Instructions on how to access and make basic settings in the configuration mode.
Guides on selecting the type of standard signal used for input.
Details on adjusting the electronics to the specific valve and fluidic conditions.
Instructions for fine-tuning the valve frequency to optimize characteristic curves.
Guides on setting the lower and upper limits for the coil current defining the working range.
Explains how to set ramp times for attenuating sudden input signal changes.
Details on activating/deactivating zero point cut-off for leak-tight valve closing.
Guides on setting controller dynamics in three discrete steps for optimal response.
Instructions for setting the bus address when using serial interfaces.
Inputting the safety position percentage controlled by a specific input signal.
Function for transferring parameters between an operating unit and basic devices.
Quits the current menu level and saves the settings made during configuration.
Lists the default factory settings for various configuration parameters and their comments.
Crucial safety precautions to be observed during any maintenance work on the device.
States that the control electronics is maintenance-free when used as instructed in the manual.
Provides tables for ordering different device variants based on valve type and current range.
Lists available accessories and their identification numbers for the Type 8605.
Step-by-step instructions for safely shutting down and removing the device.
Instructions for safely restarting the device after it has been stored.
To Next Page
