Burley BEE - Installing the Safety Flag

BEE
ASSEMBLY & USE
7
Securing Your Child
WARNING
AVOID SERIOUS INJURY
FROM FALLING OR
SLIDING OUT. ALWAYS
USE 5POINT HARNESS.
Installing Additional Lights
Assemble the flagpole sections
together, then slide safety flag into the
flag pocket on the side panel.
1
Installing the Flag
Fabric loops are located on the back of
the trailer fabric and should be used to
attach additional lights and/or reflectors.
1
After seating children, secure and adjust
the harnesses. Snap shoulder straps &
waist straps into 5-point harness buckle
and adjust straps so they are secure.
To remove your children,
press the yellow release button
on the 5-point harness.
When using double trailer with
one child, always seat the child
in the right side position
1
2
3