Burley Encore X - Converting to Stroller Mode; Converting to Trailer Mode; Attaching the Jogging Tether

ENG DEU FRA ESP
ENCORE X
ASSEMBLY & USE
11
ASSEMBLY & USE
for TOC, do not delete. box must not extend to pages edges. don't forget to also add it to your pages panel
Pull fork as shown, then rotate wheel
down fully. Fork will automatically
secure into the locked position.
Pull fork down and rotate up into trailer mode
as shown. Fork will automatically lock into
trailer position when positioned correctly.
1
1
Converting to Stroller Mode Attaching the Jogging Tether
note
The black tab that extends from the stroller mount towards the
flex connector is not a lever. It is a safety mechanism to prevent
the attachment of the trailer to a bicycle while the stroller wheel
is in its downward (strolling) position.
1
Wrap the strap around the handlebar
center, slide the larger loop through
the smaller loop on the other end of
the strap and pull to tighten securely.
Removing the
Tow Bar
Converting to Trailer Mode
WARNING
STROLLER WHEEL MUST ALWAYS BE
FOLDED UP AND PROPERLY LOCKED
INTO TRAILER MODE, BEFORE PULLING
BEHIND A BICYCLE. FAILURE TO POSITION
STROLLER WHEEL IN TRAILER MODE
BEFORE CYCLING COULD RESULT IN AN
ACCIDENT AND SERIOUS INJURY OR DEATH.