MAIN/REC change Shortly pressing the MODE button will allow you to switch between MAIN and RECORD
level.
Phase reversal Longer Pressing the DIM button (approx. 2 seconds) will reverse the phase of the presently
activated input channel by 180°. When the phase rev ersal is active, the PHASE LED (2) will
light up.
Up sampling If you have a D/A-converter module, and the module input is selected you are able to
change the sample rate between 192kHz (SRC LED (3) lights up) and 96 kHz (SRC LED
(3) is off). You may do so by shortly pressing the AUDIO button.
Input D/A module If you have a D/A-converter module and the module input is selected, you have the option
to select between the USB and the RCA input. Longer pressing the AUDIO button (approx.
2 seconds) will switch the inputs.
Setup menus • Longer pressing the MENU button (approx. 2 seconds) will open the GLOBAL MENU.
Shortly pressing MENU again will close the menu.
• Shortly pressing the MENU button will open either the MAIN MENU or RECORD MENU,
depending on which level you are currently in. Shortly pressing the MENU button again
will close the menu.
• Longer pressing the MODE button (approx. 2 seconds) will open the PHONES MENU.
Shortly pressing the MENU button will close the menu.
• Shortly pressing the AUDIO button will open the PHONO MENU, if a Phono MM or MC
module is equipped and the module input is selected. Shortly pressing the MENU button
will close the menu.
• Longer pressing the AUDIO button (approx. 2 seconds) will open the MC MENU, if a
Phono MC module is equipped and the module input is selected. Shortly pressing the
MENU button will close the menu.
• Longer pressing the AUDIO button (approx. 2 seconds) will open the MM MENU, if a
Phono MM module is equipped and the module input is selected. Shortly pressing the
MENU button will close the menu.
To Next Page
Loading...
Need help?
General
