17| 28
MAINS VOLTAGE
Prior to connection, check to see if the mains voltage specified on the back panel
of the device above the AC mains terminal matches the mains voltage for your
household.
WARNING: DANGEROUS VOLTAGES
Before connecting the device, make sure that the protective earth contact
in your mains socket is in operation. If the protective earth contact is
missing or not connected correctly, this poses a risk of fatal injury!
Contact a professional if you are in any doubt.
During operation, the AC outlets conduct dangerous voltages. Never touch
them when the power conditioner is connected. Always use prefabricated
power cables to connect the AC outlets.
WARNING: POWER CONNECTION
Use the three-core power cable supplied with the device to connect it to
the power supply. The protective earth contact must never be disabled.
At the factory, the mains voltage is set to the national standard for the
country in which you purchased your Burmester device.
If you intend to operate your Burmester device at a different mains voltage
to that set at the factory, you will need to send your Burmester device to
our Sales team or our factory in Berlin so that the mains voltage can be
adjusted accordingly.
If you are uncertain of the mains voltage at your installation site, please
make sure you check with your authorised Burmester dealer prior to
installation.
To Next Page
Loading...
