
Do you have a question about the Burnham V8 Series and is the answer not in the manual?
| Model | V8 Series |
|---|---|
| Fuel Type | Natural Gas or Propane |
| Heat Exchanger Material | Cast Iron |
| Water Content | Varies by model |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Ignition Type | Electronic Ignition |
Explains hazard symbols (Danger, Warning, Caution, Notice) used in the manual.
Details on providing adequate air for combustion and ventilation.
Procedures for installing the boiler jacket and the oil burner.
Detailed steps for installing the Beckett oil burner assembly.
Instructions for connecting field wiring for different burner and boiler configurations.
Illustrates wiring for steam boilers with various LWCO and burner combinations.
Explains the operational sequence for boilers with probe or float LWCOs.
Wiring diagrams for water boilers with Beckett or Carlin burners, with/without tankless heaters.
Covers pre-start checks, inspecting installation, and filling the heating system with water.
Instructions for setting controls, adjusting burner settings, and starting the burner.
Procedures for verifying primary control functions, safety checks, and lockout modes.
Detailed checks for the oil primary control, including safety features and cad cell.
Important safety information regarding refractory ceramic fiber, including PPE and first aid.
Identifies common combustion problems like nozzle issues, flame shape, and air leaks.
Troubleshooting steps for burner not starting, erratic flame, or control lockouts.
Guidelines for installing, wiring, and testing probe-type Low Water Cut-Off devices.
Details the one-year warranty and lifetime heat exchanger warranty for water boilers.
Outlines additional terms, conditions, and steps for obtaining warranty service.
Covers the first-year warranty and 10-year warranty for steam boiler section assemblies.
Details the lifetime nipple leakage warranty and warranty service procedures.












Loading...