EasyManua.ls Logo

Burnham V7 SERIES - User Manual

Burnham V7 SERIES
47 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
8142711R24-7/99
Price - $3.00
INSTALLATION,
OPERATING AND SERVICE
INSTRUCTIONS FOR
V7 SERIES OIL FIRED BOILER
KNOCKDOWN & PACKAGED
HEATING UNITS
The ULC label or listed
marking on a product is the
only evidence provided by
Underwriters' Laboratories of
Canada to identify products
which have been produced
under the listing and follow-up
service.
These instructions have been
reviewed by ULC and found
suitable for use in the
installation of ULC labeled
V-7 Series Boilers.
As an
ENERGY
STAR
®
Partner,
Burnham Corporation
has determined that the
V73WR (0.60 GPH),
V74WR (0.80 GPH),
V75WR (0.90 GPH),
and V76WR (1.15 GPH)
meet the ENERGY STAR
®
guidelines for Energy
efficiency established by the
United States Environmental
Protection Agency (EPA).
For service or repairs to boiler, call your heating contractor. When seeking information on boiler, provide
Boiler Model Number and Serial Number as shown on Rating Label.
Boiler Model Number Boiler Serial Number Installation Date
_V7 ____-____
6_ _ _ _ _ _ _
Heating Contractor Phone Number
Address

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Burnham V7 SERIES and is the answer not in the manual?

Burnham V7 SERIES Specifications

General IconGeneral
ModelV7 SERIES
Water ContentVaries by model
DimensionsVaries by model
WeightVaries by model
Hydronic ConnectionsVaries by model
Vent DiameterVaries by model
Fuel TypeGas

Summary

Important Information and Safety

Installation Standards and Codes

Details on applicable codes and standards for boiler installation.

Boiler Suitability and Clearances

Information on floor suitability, clearances from combustibles, and ventilation.

Knockdown Boiler Assembly

Boiler Removal and Handling

Steps for safely removing the boiler from its shipping skid and moving it.

Leak Testing and Draining

Procedures for checking the boiler for leaks and draining it.

Component Inspection and Installation

Inspecting joints, flue plates, and installing the canopy.

Steam or Water Trim Installation

Guidance for installing necessary trim components for steam/water boilers.

Installation Instructions

Packaged Boiler Preparation

Steps to unpack and prepare packaged boiler units.

Boiler Positioning and Inspection

Safely positioning the boiler and inspecting its combustion chamber.

Piping and System Connections

Connecting the boiler to the heating system's supply and return piping.

Operating and Service Instructions

Pre-Startup Inspection and Filling

Performing final checks and filling the heating system with water.

Control, Wiring, and Burner Checks

Verifying all controls, electrical connections, and burner security.

Lubrication and Control Settings

Guidance on lubrication and setting boiler operating controls.

Boiler Cleaning Procedures

Flue and Firebox Cleaning

Instructions for cleaning the boiler's flue passages and firebox.

Reassembly and Final Checks

Steps for reassembling the boiler after cleaning and performing checks.

Repair Parts and Support

Burnham Corporation Regional Offices

Contact information for regional offices to assist with parts and support.

Related product manuals