
Do you have a question about the Burnham V11H Series and is the answer not in the manual?
Recommended installation practices and standards for US boilers.
Recommended installation practices and standards for Canadian boilers.
Instructions to prevent inhalation of hazardous fiber particulates and dust.
Provides physical dimensions and specifications for boiler placement and installation.
Details technical ratings, output, and performance data for boiler models.
Guidance on selecting an appropriate and safe location for boiler installation, including clearances.
Requirements for proper air intake and venting for combustion and safety.
Instructions for carefully inspecting the boiler shipment for damage or shortages.
Guidelines for selecting the proper installation location, including clearances.
Instructions for setting up factory-assembled boiler sections.
Procedure for assembling boiler sections in the field, including manual draw-up.
Air supply, ventilation, and chimney/vent requirements for safe installation.
Procedure for testing the assembled boiler sections with water pressure.
Instructions for assembling canopy, flue outlets, baffles, covers, seals, firewall plates, and jacket.
Guidelines for installing water trim, heating piping, DHW piping, tankless heaters, and electric wiring.
Steps before starting burner, and procedure for filling heating system with water and venting.
Instructions for operating steam/hot water modes, setting controls, and burner adjustment.
Instructions for cleaning boilers, systems, and addressing oxygen corrosion and water addition issues.
Instructions for cleaning boiler heating surfaces, flue passages, vent systems, and firebox.
Annual inspection and maintenance for probe and float type low water cutoff devices.
Annual checks and maintenance for burners, controls, and general components.
Procedures for preparing the boiler for storage to prevent freeze damage and ensure longevity.
Technical specifications for Beckett, Power Flame, Webster, and Carlin oil, gas, and combination burners.
Information on how to locate a Burnham Commercial Distributor for parts or assistance.
One-year warranty covering defects in material and workmanship for boilers and supplied parts.
Warranty terms for heat exchangers based on years in service.
General terms and conditions applicable to the limited warranties provided.
Steps to follow for obtaining prompt warranty service and support.












Loading...