Burson Soloist - Connections

!
4!
Connections
This section provides instructions to connect the Burson Soloist to the rest of your music system.
Avoid static shocks to the inputs or outputs. Before connecting or removing a cable, touch any
grounded surface, such as the chassis of a component that is plugged into an AC socket. Inputs and
outputs can be safely connected to the Burson Soloist when its AC power is switched off.
BURSON
L M H
I II III
Three way inputs
selection
Three level outputs
selection
Power indicator,
Headphone Jack output
Power Switch & Fuse Holder (3A
Fast Blow type)
Power Intake
Main voltage
switch 110V /
240V
Pre Amp Output
3 RCA line level input sets
!!!!!!!!!!!!