Burstner Trecento 2011 - Round Seating Group with Square; Table

65Belcanto/Trecento - 10/11 - Ausgabe 07/10 - 1976844 - BUE-0042-06EN
Living
6
6.12.2 Round seating group with square table
 Convert the table (Fig. 72,3) to a bed foundation (see section 6.10).
 Remove the back cushions (Fig. 73,4 and 5) and lay them aside.
 Pull the seat cushions (Fig. 73,2) into the centre of the table.
 Insert the back cushions (Fig. 73,1) between the seat cushions and the
exterior wall. Observe the wedged form.
 Place the additional cushion (Fig. 74,6) between the seat cushions.
 Depending on the model, the seating group can be different in shape and
position to the one shown here.
Fig. 72 Prior to conversion
Fig. 73 During conversion
Fig. 74 After conversion
1 Back cushion
2 Seat cushion
3 Table
4 Back cushion
5 Back cushion
6 Additional cushion (basic or foldable)