Why is the oil in my BUSCH R5 black?
If the oil in your BUSCH Water Pump is black, it could be due to oil change intervals being too long, in this case you should drain the old oil and fill in new oil. Another reason could be that the machine runs too hot.
What causes an electrical cabinet temperature alarm in my BUSCH R5?
If you're getting an electrical cabinet temperature alarm on your BUSCH Water Pump, it means the temperature in the control unit is too high. This can be due to insufficient cooling, so remove any dust and dirt from the machine and check the heat exchanger. It could also be due to a high ambient temperature, ensure that the ambient temperature is within the permitted range.
Why is the oil in my BUSCH R5 Water Pump emulsified?
If the oil in your BUSCH Water Pump is emulsified, it indicates that the machine has drawn in liquids or significant amounts of vapour. You also can clean the filter of the gas ballast valve and modify the operational mode.
What does inlet pressure warning mean on my BUSCH Water Pump?
An inlet pressure warning or alarm on your BUSCH Water Pump indicates that the inlet pressure is too high, or the machine has operated for too long at a high inlet pressure. Reduce the inlet pressure and limit the operating time at a high inlet pressure.
What to do if my BUSCH Water Pump does not reach the target pressure?
If your BUSCH Water Pump isn't reaching the target pressure in pressure control mode, it might be over or undersized for the application, or there could be leaks or pressure drops in the pipework upstream of the suction connection. Check the system pipework.
What causes the exhaust gas pressure warning on my BUSCH R5 Water Pump?
An exhaust gas pressure warning or alarm indicates that the exhaust gas pressure in the oil separator is too high. Replace the exhaust filters.
What does differential pressure high warning mean on BUSCH Water Pump?
A high differential pressure warning on your BUSCH Water Pump (if the inlet filter condition monitoring kit is installed) indicates that the inlet filter cartridge is clogged by dust or particles. Replace the inlet filter cartridge.
How to fix communication problems with my BUSCH Water Pump remote control?
If you're experiencing communication problems when remotely controlling your BUSCH Water Pump, check the wiring between the machine and the network to ensure there are no broken wires or loose connections. Also, verify the remote control parameters.
What does oil level alarm mean on my BUSCH Water Pump?
An oil level alarm on your BUSCH Water Pump indicates that the oil level is too low. Top up the oil.
General| Brand | BUSCH |
|---|---|
| Model | R5 |
| Category | Water Pump |
| Language | English |
To Next Page
