3 | Transport
6 / 24 0870145123_SB0050-1400D0_D2_A0000_IM_en
2.4.2 Pressure Regulating Valve
The pressure regulating valve controls pressure when the machine is used on overpres-
sure duties.
2.4.3 Inlet Filter
The inlet filter protects the machine against dust and other solids in the process gas. The
inlet filter is available with a cartridge.
2.4.4 Silencer
A silencer at the discharge connection (OUT) can be provided to reduce the exhaust gas
noise.
3 Transport
WARNING
Suspended load.
Risk of severe injury!
• Do not walk, stand or work under suspended loads.
Machine weight:
see the technical data or the nameplate
• Check the machine for transport damage.
If the machine is secured to a base plate:
• Remove the machine from the base plate.
4 Storage
• Seal all apertures with adhesive tape or reuse provided caps.
If the machine is to be stored for more than 3 months:
• Wrap the machine in a corrosion inhibiting film.
• Store the machine indoors, dry, dust free and if possible in original packaging
preferably at temperatures between -30 ... 40 °C.
To Next Page
Loading...
