Bush 55/148F - TV Buttons and Input Source Selection

Getting to know your TV
You’ll be up and running in no time
Getting to know your TV
18
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
STANDBY
1234567
1) Standby Power On/Off
2) Displays the input source menu
3) Displays Menu/OSD
4) Programme/Channel down and menu down
5) Programme/Channel up and menu up
6) Volume down and menu left
7) Volume up and menu right
Choosing mode and input/source
To switch between the different input/connections.
A) Using the buttons on the remote control:
1) Press [SOURCE] - The source menu will appear.
2) Press [\/] or [/\] to select the input you require.
3) Press [OK].
B) Using the buttons on the Television:
1) Press [SOURCE].
2) Scroll up / down using CH+/ CH- buttons to the
input/source you require.
3) Press Vol+ to change input/source to the one
selected.
For further information on input/connections please
view ‘Connections’ pages.
TV buttons and input source
Example of Source menu depending on the TV model
Component / YPbPr
Freeview TV
Composite/AV
VGA/PC
USB Media
Analogue TV
User Guide - BUS-MAN-0027 BUSH 55-148F.indd 18User Guide - BUS-MAN-0027 BUSH 55-148F.indd 18 04/12/2015 15:16:4004/12/2015 15:16:40