4.
12
Getting to know your soundbar
You’ll be up and running in no time
The soundbar can be connected to an MP3 player using the 3.5mm jack-to-jack lead supplied (fig. 5). Connect
one end of the lead to the headphone 3.5mm audio output socket and the other end to the
socket of the soundbar at the rear of the soundbar.
Fig. 5
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions
3.5mm Line In
To Next Page
Loading...
