Other information
Helpful technical information
Other information 17
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 604 0105.
Technical specification
Amplifier
Power output 80W RMS
Frequency response 38Hz - 20KHz
Input sensitivity 700mV
Main unit
Power supply INPUT: 110- 240V ~ 50/60Hz
Power consumption 40W
Standby power consumption ≤ 0.5W
Full range speaker drivers
Subwoofer
Impedance: 8 Ohm, 50 x 90mm
Frequency response: 180Hz ~ 20KHz
Impedance: 4 Ohm, 120mm
Frequency response: 35~2.5KHz
Dimensions Soundbar: 820 x 64 x 60mm
Sub woofer: 130 x 370 x 250mm
Mains cable length 1.5 metre
Remote control
Battery 2 x AAA battery
Bluetooth
Bluetooth compatibility EDR, GFSK, π/4-DQPSK, 8DPSK
Bluetooth version V5.0
Care & maintenance
After using the soundbar
Set to Standby.
Switch the unit o
at the mains and unplug it if you are
leaving it unattended for a long period (holidays etc).
Avoid leaving the battery fitted in the remote control if
you leave the unit unattended for long periods. It may
leak and damage the remote control.
Care & cleaning
All care and cleaning operations should be carried out
with the unit unplugged from the mains power.
Occasionally wipe the cabinet with a lint free duster.
Never clean the unit with liquids or solvents.
Sounebar net weight
subwoofer net weight
Bluetooth Pairing Name Bush B-3515A
Temperature and Humidity 10℃ to 35℃ Relative humidity 40 to 85%
Bluetooth frequency range 2402MHZ - 2480MHZ
2.56KG
1.32KG
To Next Page
Loading...
