Bush BAS520BT - Aux in Input; Optical Input; Coaxial Input

BAS520BT
12
Aux In Input
This feature enables the unit playing sound from your audio device.
1. Before connecting to the mains socket, connect the Red(L) and Black(R) plugs at the
end of the RCA cable (not supplied) to the AUX IN 1 socket which is located on the back
of this unit. Then insert the other end of your RCA cable to your audio device.
2. Connect power cord to mains socket, press STANDBY/ON button to switch unit on.
3. Press SOURCE button repeatedly to select AUX IN 1 Input mode.
Note
:
The operations are the same for AUX IN 1 Input and AUX IN 2 Input modes.
Optical Input
This feature enables the unit playing sound from your audio device.
1. Before connecting to the mains socket, connect a fiber-optical digital cable (not supplied)
to OPTICAL1 socket on the back of the unit.
2. Connect power cord to mains socket, press STANDBY/ON button to switch unit on.
3. Press SOURCE button repeatedly to select OPTICAL1 Input mode.
Note
:
1. The operations are the same for OPTICAL 1 Input and OPTICAL 2 Input modes.
2. If there is no sound output and the OPTICAL indicator flashes, ensure the audio
setting of the input source (e.g. TV, game console, DVD player, etc.) is set to
PCM mode with optical input.
Coaxial Input
This feature enables the unit playing sound from your audio device.
1. Before connecting to the mains socket, connect a coaxial digital cable (not supplied) to
COAXIAL socket on the back of the unit.
2. Connect power cord to mains socket, press STANDBY/ON button to switch unit on.
3. Press SOURCE button repeatedly to select Coaxial Input mode.