BAS520BT
8
DAB+ Mode
When the first time you turn on the unit it will automatically search and store all the available
stations. You should conduct an additional Full Scan to ensure all stations are picked up and
stored. It is also recommended every few months to run a new scan to pick up any new DAB+
that may have begun broadcasting after purchasing your unit.
1. For initial use, your unit will conduct a full scan and store stations list in memory.
2. Once the scanning is completed, the DAB+ stations will be displayed in alphanumeric
order. The first station in the list will be selected.
1. The DAB+ stations will be displayed and stored in alphanumeric order.
2. If no DAB+ signal is found, it may be necessary for you to relocate your unit.
Station List
This feature enables you to select a station from available station list.
1. Press MENU button and then press or button to select Station List, press
SELECT button to confirm.
2. Or, while a program is playing, press TUNE button first then press or button
to show station list.
3. Press or button to browse stations list, and then press SELECT button to
confirm. The selected station will be broadcast.
Full Scan
This feature enables your unit to scan for all available stations.
Press MENU button and then press or button to select Full Scan, press SELECT
button to confirm.
Storing Preset Stations
:
This is the same for DAB+ and FM stations.
Your unit can store up to 10 of your favourite DAB+ and FM stations as preset stations. This
will enable you to access your favourite stations quickly and easily.
1. Press and hold PRESET button until LCD display shows ‘Preset Store <1: (Empty)>’.
To Next Page
Loading...
