Bush BRCP90EBLK - Troubleshooting

Product support
Help is always at hand
Product support
34
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
1. If no electrical functions appear to work, check
the cooker isolation switch has not been turned
o also check the fuse in the switch and the
circuit breaker in you consumer unit
2. After replacing the fuse or resetting the circuit
breaker turn on individual parts of your cooker
one at a time to check function
3. DO NOT ATTEMPT TO REPAIR THIS
COOKER YOURSELF. CALL BUSH PRODUCT
SUPPORT ON 01759 487838
Problem Possible Cause Solution
Oven will not operate Clock/timer set to
AUTO
Set the clock/timer to
MANUAL.
Now manual operation is
now possible.
Nothing works (completely
dead)
Power is turned o at
the isolation switch or
the consumer unit
Poor electrical connection
Ensure isolation switch is on
Check consumer unit has not
tripped out
Have the connections
checked by a qualified
electrician
The cooking zones are
not operating
Poor electrical
connection
Power is turned off at the
isolation switch
Oven not heating up Oven temperature not set
correctly
Door is not properly
closed
Ensure that the correct
temperature has been
selected and the door is
properly closed
Troubleshooting
Ensure isolation switch is
on, check consumer unit
has not tripped out
Have the connections
checked by an electrician