Using your DVD Player
Let’s get started
Using your DVD Player
19
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 600 3021.
Zoom (DVD, Images)
With your DVD Player you can zoom into an image or
part of an image on the screen. Options of X2, X3, X4
and 1/2, 1/3 and 1/4 size are available.
1. Press the ZOOM button to activate the Zoom
feature. Repeatedly press the ZOOM button to
cycle through and display the available options.
2. When you are in Zoom mode, you can use the
up, down, left and right buttons to scroll
to the part of the picture that you wish to Zoom
into.
3. To turn the Zoom feature off, repeatedly press the
ZOOM button until ZOOM: OFF is displayed.
Note: Zooming into an image will degrade the
quality as the pixels of the image are being enlarged.
Multi-angle (DVD)
Some DVDs contain scenes which have been shot
simultaneously from a number of different angles. For
these discs, the same scene can be viewed from each
of these different angles by using the ANGLE button.
1. During playback, repeatedly press the ANGLE
button to cycle through the available angles.
Note: If different angles are not available on your
DVD ‘Invalid key’ will be displayed.
Subtitles (DVD)
1. Press the Subtitle button to turn the subtitles in a
movie (if available), on or off.
Numeric keypad (DVD/CD)
You can use the numeric keys to go to a particular
Chapter or Track when playing a DVD or CD disc.
1. Enter the chapter or track number using the
numeric keypad.
2. For chapter or track number 10, press the 10+,
followed by the 0 button. For chapters or tracks
higher than 10, such as track 24, press the 10+
button twice and then the 4 button.
DVD/USB
You can switch between DVD and USB mode to view
images or play music files from a USB stick.
1. Insert the USB stick into the USB socket on the
front of your DVD Player.
2. Press the DVD/USB button and use the down
button to highlight USB. Press the OK button.
3. Your DVD Player will now read the content on
your USB stick. Please wait for a few moments.
4. When the content on your USB stick is displayed,
you can use the up, down, left and
right buttons to move to the image or music file
that you want, then press the OK button.
5. To go back to DVD mode, press the DVD/USB
button and use the up button to highlight DVD.
Press the OK button.
Programming (DVD/CD)
During DVD or CD playback, you can program the
order of the Chapter, Title, or Track that you watch.
1. Press the PROG button. The program setting
menu will be displayed:
DVD
Fig 32.
T C
T C
5 -- :--
T C
9 -- :--
T C
13 -- :--
2 -- :--
6 -- :--
10 -- :--
14 -- :--
3 -- :--
7 -- :--
11 -- :--
15 -- :--
4 -- :--
8 -- :--
12 -- :--
16 -- :--
PROGRAM PLAY
CLEAR
1 -- :--
To Next Page
Loading...
