Using your DVD Player
Let’s get started
Using your DVD Player
20
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
CD
2. Use the direction and numeric buttons to enter
and set the desired Title, Chapter or Tracks
3. After you have finished programming, use the
direction buttons to highlight PLAY and then press
the OK button.
4. To reset the programmed entries and start again.
Use the direction buttons to highlight CLEAR and
then press the OK button.
System setup
The SETUP menu enables you to set your preferences
for the different options available on your DVD Player.
You can use the Up, Down, Left and Right
buttons to highlight each function or option and then
press the OK button to confirm.
1. Press the SETUP button, to display the SETUP
menu options.
2. Use the Right and Left buttons to move
across the 4 Setup menu option screens. A yellow
bar will appear under the current menu option
screen.
PROGRAM PLAY
CLEAR
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
Fig 33.
TV SYSTEM
SCREEN SAVER
TV SHAPE
PASSWORD
RATING
LAST MEMORY
ANGLE MARK
Fig 34.
3. You can then use the Up, Down, Left
and Right buttons to highlight each function or
option and then press the OK button to confirm.
Setup - Last Memory
There are two options available, ON or OFF. If you set
the Last Memory feature to ON and you play a disc
that you have played before, the disc will start from the
place it was last stopped.
Setup - TV Shape
The TV Shape option enables you to set the aspect
ratio of the DVD Player to match to the connected TV.
The following options are available:
• 4:3/PS (pan and scan)
• 4:3/LB (letter box)
• 16:9 (widescreen).
Setup – Angle Mark
There are two options available, ON or OFF. If you set
the Angle Mark feature to ON and you play a disc that
has multi angle viewing options, the Angle icon will
appear in the display when this option is available
Setup - Password
You can set the viewing rating for your DVD Player and
protect this with your own password:
Setting your own password:
1. Within the SETUP menu, scroll down and highlight
PASSWORD and press the OK button. The 4 digit
password and lock symbol will be highlighted .
2. Enter the default password of 0000 and press the
OK button. The lock symbol will change to be
unlocked .
3. Use the right arrow to highlight the 4 digit
password and unlock symbol again. Enter your
own 4 digit password and press the OK button.
The lock symbol will changed to be locked
again and your new 4 digit password has been
saved.
To Next Page
Loading...
