section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
Using your Mono DAB/FM Radio
Let’s get started
2. Short press the Prev button to scroll to <System>. Short press the Volume control to
Select.
3. Use the Prev or Next button to scroll to <Backlight>. Short press the Volume control
to Select.
4. <Timeout> is displayed. Short press the Volume control. Use the Prev or Next button
to scroll through the available backlight timeout options of On, 10, 20, 30, 45, 60, 90,
120 or 180 seconds. Stop when the backlight timeout you would like is displayed and
short press the Volume control to Select. <Timeout> will be displayed.
You can now use the Prev or Next button to scroll and press the Volume control to
Select, as you did to set the Backlight timeout, to change the settings for the backlight
brightness for the <Dim level> and <On level>. There are 3 options available, High,
Medium and Low.
Display language
You can change the display language of your radio, there are 4 options available; English,
French, German and Italian. An ‘*’ will be displayed next to the current setting.
With your radio switched on (not in Standby mode):
1. Long press the Menu button to enter the menu options.
2. Short press the Prev button to scroll to <System>. Short press the Volume control to
Select.
3. Use the Prev or Next button to scroll to <Language>. Short press the Volume control
to Select.
4. Use the Prev or Next button to scroll to the language you would like. Short press the
Volume control to Select.
To Next Page
Loading...
