Bush DVB-T2 PVR - Recording Configuration Options; Max Time Shift Setting; Auto Discard Configuration; Watershed Time Period Settings

- 19 -
Max Time Shift
Select the maximum time allowed for timeshifting.
See Time Shifting section for more information on
timeshifting
Auto Discard
Discard: When the HDD is full and a timer is set to
record, the unit will automatically discard previous
recordings based on this setting. The options are
as follows:
None: The unit will not discard any recordings and
the timer will not record the requested programme.
Oldest: Starting with the oldest, recordings will be
deleted to make space for the requested timer.
Longest: Starting with the longest, recordings will
be deleted to make space for the requested timer.
Shortest: Starting with the shortest, recordings will
be deleted to make space for the requested timer.
Unplayed: If this option is set to EXCLUDED any
unplayed recordings will NOT be deleted. If this option
is set to INCLUDED, unplayed recordings WILL be
deleted.
Watershed: Use these settings to change the
watershed time period. Press MENU button to exit.
Any recording which is made during the watershed
period will have “Playback” set to “Disallowed” when it
appears in the library. You can only play the recording
if you enter the PIN.
One Touch Recording :
HD alternatives :You can adjust this setting to suit
your preference.
Conguration
• You can congure the main settings of your set top
box using the conguration screen.
• Select Conguration from Setup & Retune menu
and press OK to continue.
• You can press BACK button to exit
Active channels
• You can select broadcasts to be listed in the channel
list. To display specic types of broadcast, you
should use Active channel list setting.
• Select Active Channels by using “ ”/“ ” buttons.
• You can select a broadcast type option from the list
by using “ ”/“ ” button. Available modes are: TV
Only, Radio Only, Text Only, Favourites or Show
All (if available).
• Press the MENU button to save the recent changes
and exit.
Scan Encrypted
• When this setting is on, search process will locate
the encrypted channels as well. If it is set as Off,
encrypted channels will not be located in automatic
search or manual search.
• Use“ ”/“ ” buttons to highlight Scan Encrypted and
press “ ”/“ ” buttons to select YES or NO.