17
EN
If you have damaged or missing parts,
call the Customer Helpline: 0345 257 7271
Your machine is equipped with systems which will take the necessary precautions and warn you in
case of any. IMPORTANT: IT CAN TAKE UPTO 10 MINUTES FOR ERROR TO
REGISTER.
Failure code Probable failure Process to be followed
The door is not shut properly. Shut the door properly so that you
hear the click. If the problem per-
sists, turn off the machine unplug
and contact the nearest authorised
service agent immediately.
The water level in your machine is
below heater. The pressure of your
water supply may be low or water
supply may be blocked.
Turn on the tap fully. The water
supply may be interrupted. If the
problem persists, your machine will
automatically stop after a while.Un-
plug your machine, turn off the tap
and contact the nearest authorised
service agent immediately.
The pump has failed or the pump
filter is obstructed.
Clean the pump filter.If the
problem persists and contact the
nearest authorised service agent
immediately. (*)
Your machine has excessive
amount of water.
Your machine will discharge water
by itself. Pursuant to discharging
operation, turn off your machine
and unplug it. Turn off your tap
and contact the nearest authorised
service.
(*) See the section regarding the care and maintenance of your machine.
Error Signals
E01
E03
E02
E04
Wash
Wash
Wash
Wash
Rinse
End
End
Rinse
Rinse
Rinse
To Next Page
Loading...
