4
EN
If you have damaged or missing parts,
call the Customer Helpline: 0345 257 7271
Caution: 2 people are required to unpack the
washing machine, it is recommended that gloves
are worn.
a: Carefully remove all packaging materials includ-
ing the foam base, dispose of correctly.
Note: When opened, water droplets may be vis-
ible in the drum etc. this is normal as each appli-
ance is factory tested.
Important: The packing bolts are designed to
support the internal components during transit,
these MUST be removed before use.
a: Loosen the screws by rotating counterclockwise
with a suitable wrench. (1 & 2)
b: Remove the bolts by pulling them. (3)
c: When the transport bolts have been removed,
insert the plastic transport screw taps found in the
accessories bag into the holes. (4)
a: For your machine to work efficiently with mini-
mum vibration it should be settled on flat, non-
slippery, firm ground.
b: You can adjust the balance of your machine by
changing the positioning of its feet.
c: First, loosen the plastic adjustment nut. (5)
d: Adjust by rotating the feet upwards or down-
wards. (6)
e: After the desired position has been reached,
tighten the plastic adjustment nut again by rotating it
upwards.
Note: Never put cartons, wooden blocks or similar
materials under the machine to balance irregulari-
ties in the level of the ground.
Installation
X
4
X4
X4
1 2
3 4
5
6
X4
To Next Page
Loading...
