EasyManua.ls Logo

Bush RL60SPH - Electrical Connection Procedure

Bush RL60SPH
34 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installing your Built-in Hob
Bringing it all together
Electrical connection
Appliances with three-pole cable are set up for operation with alternating current at the
voltage and frequency indicated on the rating plate. The earth conductor is yellow/green.
The connection to the electricity supply must be made by a qualified person and
following the regulations in force.
When the appliance is to be installed above a built-in oven, the two appliances must be
connected separately, to make it easier to take the appliances out and for electrical
safety.
The supply cable must be so positioned that no point can reach a temperature 50° C higher
than ambient temperature.
Also check that the supply system has an effective earth connection and corresponds to the
standards in force and that the plug (or omnipolar switch) can be reached easily when
the appliance is installed.
IMPORTANT: The wires in the mains lead are coloured in accordance with the
following code:
Green and yellow: Earth
Blue:
Neutral
Brown:
Live
Getting to know your Built-in Hob
17
or online at www.bush-su
pport.com If you still require further assistance, call one of our
experts on 01759 487838
Neutral
Live
Earth

Related product manuals