Product support
Help is always at hand
Product support
28
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
1. If no electrical functions appear to work, check
the isolation switch has not been turned off also
check the fuse in the switch and the circuit
breaker in you consumer unit
2. After replacing the fuse or resetting the circuit
breaker turn on individual parts of your hob one
at a time to check function
3. DO NOT ATTEMPT TO REPAIR THIS
APPLIANCE YOURSELF. CALL BUSH
PRODUCT SUPPORT ON 01759 487838 OR
CONSULT A QUALIFIED ELECTRICIAN
Troubleshooting
To Next Page
Loading...
