EasyManua.ls Logo

Bush VL19HDLED - Specifications; Digital Reception Standards

Bush VL19HDLED
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
46
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Other information
Other information
Helpful technical information
Specifications
Digital reception
TV Broadcasting PAL, B/G, D/K, I, SECAM, L/L
Receiving Channels VHF (BAND I/III) - UHF (BAND U) - HYPERBAND
Number of Preset Channels 100
Channel Indicator On Screen Display
RF Aerial Input 75 Ohm (unbalanced)
Operating Voltage AC 100-240V~ 50/60Hz
Audio Nicam
Audio Output Power (WRMS.) (10% THD) 2 x 3 W
Panel Dimensions DxLxH (with foot) 134 x 443 x 312 mm
Weight (with foot) 1.9 kg
Panel Dimensions DxLxH (without foot) 72 x 443 x 274 mm
Weight (without foot) 1.75 kg
Energy Consumption Data EEI A
On Mode Power Consumption (W) 30W
Standby Mode (W) 0.5W
Standby Mode After 4 Hours
MHEG-5 ENGINE compliant with ISO/IEC 13522-5 UK engine Profile 1 - for UK
Object carousel support compliant with ISO/IEC 135818-6 and UK DTT profile - for UK
Frequency range: 474-850 MHz for UK models
170-862 MHz for EU models
Transmission standard: DVB-T. MPEG-2
Demodulation: COFDM with 2K/8K FFT mode
FEC: all DVB modes
Video: MP@ML, PAL, 4:3/16:9
Audio: MPEG Layer I&II 32/44.148kHz.
We apologise for any inconvenience caused by any minor inconsistencies in these instructions, which may occur
as a result of product improvements and development.

Related product manuals