Bush VUS34AE2O - Assembly

Assembling your vacuum
Bringing it all together
Assembly
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting section of these instructions
16
Vacuum cleaner
with dust cup.
Push loose end of
hose securely
onto hose inlet.
Store accessories
on back of
vacuum cleaner.
Wrap cord onto
upper and lower
cord hooks.
Align upper and
lower cord hooks
and press to snap
in place. Upper
cord hook should
rotate freely.
Slide handle into
top of vacuum
cleaner. Push
down until it
clicks.
Loop hose over
hose retainer.
Insert bent end of
hose into opening
at back of dust cup.
Twist hose
clockwise to lock.
Click!