How to use accessories
1. Place vacuum in upright position.
2. Turn height adjustment knob to highest position.
3. Pull up on hose connection to release hose end from hose inlet (Fig.1).
4. Push end of hose into top of handle and twist clockwise until it clicks
(Fig.2).
5. Press handle release latch and pull out handle with wand (Fig.3).
6. To attach accessories, push desired tool onto end of wand (Fig.4).
7. To use accessories without handle and wand, push desired tool directly
onto end of hose (Fig.5).
Caution: When using tools, always place handle in upright position.
Using your vacuum
Let’s get started
Nozzle use
Nozzle
Floor &
Furniture
Between
cushions
Curtains
Stairs
Walls
Skirting
edges
Radiators
Floor head
19
Or by calling one of our experts on 0345 604 0105
1 3
Click!
2
4
5
Make sure vacuum cleaner is turned o while attaching tools.
To Next Page
Loading...
