Operating the appliance
Using your vacuum
Let’s get started
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting section of these instructions
18
Turn height adjustment knob to
adjust from Low to high pile carpet or
hard floor setting as appropriate.
Step on power on/o button to
turn vacuum cleaner on.
Step on again to turn o
Step on cleaner release
button to lower handle
into position for
vacuuming floors.
Empty dust container after every use
Press release button
and lift o dust
container.
To empty debris, press
lever to release bottom
lid.
Put plug into power socket
To Next Page
Loading...
