Getting to know your Stereo Flat Micro System
You’ll be up and running in no time
Getting to know your Stereo Flat Micro System 19
section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021.
• 12/24 hr: To set the time display in Standby mode to be in 12 or 24 hour clock
format.
• Set the date format.
5. Short press the Menu button on the remote control to exit from the time and date
settings.
Power on/o
Power on
Short press the Power button on the Micro or on the remote control to power on your
product.
Power o
Short press the Power button on the Micro or on the remote control. Your Micro will go
to Standby mode and the clock will be displayed.
Change the mode
Short press the Mode button on the Micro or on the remote control to change between
DAB, FM CD, Bluetooth and Aux in modes. Please check the display, which will confirm
the mode.
Adjusting the volume
Short press the Volume + or Volume - buttons on the Micro or the Vol+ or Vol- buttons
on the remote control to adjust the volume.
Check the display, which will confirm the volume setting.
To Next Page
