Bushtec Turbo+2 - Maintenance Schedule; Coupler Condition Check

10
5. MAINTENANCE
The following section is broken into subsections, BEFORE EACH USE, AFTER 50
MILES, AFTER 500-1000 MILES, AT 2500 MILES AND EVERY 2500 MILES,
REMOVAL FROM STORAGE, and MISCELLANEOUS. Each operation will take a
maximum of 10 minutes to perform and will aid in the longevity of your investment.
BEFORE EACH USE AFTER 50 MILES AFTER 500- 1000 MILES AT 2500 AND EVERY 2500 MILES REMOVAL FROM STORAGE MISC.
COUPLER CONDITION
X X X
GENERAL HARDWARE INSPECTION
X X X
LUBRICATE HEIM JOINT
X X
LUBRICATE 360 DEGREE SWIVEL
X X
LUBRICATE SUSPENSION COLLARS
X X
CHECK TIRE PRESSURE AND WEAR
X X X
TONGUE HARDWARE
X X X
WHEEL SERVICE
X
COUPLER CONDITION
Check that the captured ball in the front of the heim joint moves freely without binding,
but does not have excessive play. Check that the 360-degree swivel has full movement