24
18. GENERAL INFORMATION
LIGHTBAR BUMPER OR TUBULAR BUMPER (ALL MODELS)
These items are designed for cosmetic enhancement and/or additional lighting visibility.
They are not designed as an impact bumper or as a lifting point.
CAUTION: Do not lift the trailer by the bumper as it can crack the fiberglass body of
the trailer.
ROADSTAR FENDER ASSEMBLY
The Roadstar is unique in that the fender is bolted onto the body. It is a cosmetic
enhancement, not a structural lifting point. Do not lift the Roadstar trailer by the fender.
CAUTION: Do not lift the Roadstar trailer by the fender as it can crack the fender.
AEROWING (QUANTUM “GL”, QUANTUM, AND TURBO+2) AND SPORT
WING (ROADSTAR)
The wing assembly is a cosmetic enhancement. On the Quantum and Quantum “GL”, do
not push or lift on the middle of the wing. Push down over the feet of the wing. On the
Turbo+2 or Roadstar, do not use the wing as a lifting or pushing point for opening and
closure of the lid.
CAUTION: Do not lift or push on the wing assemblies, except as noted. This will result
in cracking of the fiberglass.
19. GENERAL FINISH CARE
Proper care of your Bushtec’s finish will lead to years trouble free service and keep it
looking its best. There are a number of high quality care products for paint available.
During the first 90 days of its life, the paint finish is still curing. It is recommended that
no wax be used during this time. Automotive wash solutions are recommended at all
times, not dishwashing liquids. Dishwashing liquids contain grease emulsifiers, which
break down the natural oils in paints as well as most waxes. By using automotive
specific products, you will eliminate this breakdown of the paint and waxes.
For painted finishes, Bushtec uses basecoat-clearcoat exclusively. The standard white
gelcoat finish can be cared for in the same manner as a basecoat- clearcoat finish. Waxes
and polishes designed for clearcoat finishes are the best choice for protecting the finish
To Next Page
Loading...