7
3. LID LATCH OPERATION, OPENING & CLOSURE
CAUTION: Do not slam the lid on any Bushtec trailer. All Bushtec trailers feature soft
closure lid systems. Slamming of the lid to close the trailer can result in damage or
breakage and failure of operation of the latch system.
NOTE: It is possible to lock the keys inside of your Bushtec trailer. Check that keys are
not inside the trailer prior to closing the lid.
TURBO+2
To Open: Push downward on the recessed logo area of the lid while pushing the lock
button in. While the lock button remains fully depressed, lift upward on the lid.
To Close: DO NOT SLAM. Bring the lid down and allow to set on the latch. Push lid
closed, the latch should snap and lid should not be able to be lifted open.
To Lock: Insert key into keyhole and rotate. Press button and check.
NOTE: Lock must be unlocked in order to open the lid on Turbo+2 model. It is possible
to lock the keys in the trailer. Check that you have your keys before closing the lid.
ROADSTAR
To Open: Push downward on the lid handle while pushing the lock button in. While the
lock button remains fully depressed, lift upward on the lid.
To Close: DO NOT SLAM. The latch features a two-stage rotary mechanism. Close the
lid and push down gently. This will engage the first stage. Then push down firmly to
engage the second stage, which will click. Pull up on handle to check lid is securely
closed. When the latch in fully engaged, the lid should have no movement.
To Lock: Insert key into keyhole and rotate. Push button to check.
CAUTION: The second stage of the latch must be engaged to keep the lid securely
closed.
QUANTUM
To Open: Push down on the back of the lid behind the third brake light or over either
foot of the aerowing if the trailer is equipped with the aerowing. This is to remove spring
To Next Page
Loading...