BWT Aquameter User Manual

Lists components shown in figures 1 and 2 for the display unit.

Lists components of the sensor unit shown in figure 3.

Explains the function and operation of the PROG and RESET buttons.

Explains BATT, OF, PRG, and the 5-digit indicator symbols.

Explains how memory information is displayed for measurements.

Details the purpose and primary use of the water+more Aquameter.

Lists conditions and considerations for proper installation.

States the product's compliance with mandatory CE guidelines.

Provides essential instructions for safe operation and handling.

Lists situations requiring immediate power disconnection and technician intervention.

Instructions for attaching the sensor unit to the filter head.

Key points to ensure correct installation and operation.

Step-by-step guide to setting the filter capacity via buttons.

Steps to reset the filter capacity after cartridge replacement.

How to view past measurements (litres and time) stored in memory.

How to view the total litres consumed since installation.

Duties for checking leaks and battery replacement timing.

Step-by-step guide for replacing the device's battery.