BWT Fairland IPHCR33 - User Manual

18 pages

Save Page as PDF

To Next Page

1 / 18

2018/12 – B - Code : 33315

BWT FAIRLAND

INVERTER PLUS

Pompe à chaleur

IPHCR15 - IPHCR20 - IPHCR26 - IPHCR33

- IPHCR40 - IPHCR45 - IPHCR55 - IPHCR70

- IPHCR70T - IPHCR100T

Main Page

Questions and Answers

S
Shawn HopkinsAug 7, 2025
Why is my BWT Inverter running but not heating the pool?
- B
  bethrobinsonAug 7, 2025
  If your BWT Inverter isn't heating the pool water, even when running, it could be due to several factors. High heat loss might be the cause, so ensure the pool is covered when not in use, the pipes are buried or lagged correctly, and the pool walls of above-ground pools are well-insulated. Also, check if the filtration timer is set adequately, avoiding short cycles or nighttime-only operation. Exceptionally low ambient air temperatures can also affect heating, so waiting for warmer weather may help. Lastly, ensure proper air circulation by cleaning the evaporator fins.
C
Crystal JohnsonAug 21, 2025
How to troubleshoot a BWT Fairland IPHCR33 that won't start?
- E
  Elizabeth KingAug 21, 2025
  If your BWT Inverter heat pump won't start, first, check that no circuit breakers have tripped and that all electrical connections are secure. If the power supply is OK, make sure the unit is turned on by pressing the On/Off button. Finally, verify that the set point temperature is appropriately configured by comparing it with the inlet water temperature.

Summary

General Product Presentation

Safety Recommendations

Technical Data and Dimensions

Product Installation

Siting

Details essential considerations for placing the heat pump outdoors.

Support

Explains how to attach the heat pump to a stable base.

Handling

Provides guidelines on how to lift and store the heat pump safely.

Hydraulic Circuit Connection

Details the procedure for connecting the heat pump to the pool's water system.

Wiring

Heating Priority

Start Up and Operation

Screen Lock;Unlock

How to lock and unlock the heat pump's control screen.

Selecting Operating Function

Explains the different operating modes like heating, cooling, and auto.

Set Temperature Value Selection

How to set the desired water temperature.

Operating Mode Selection

Details the 'Smart' and 'Silence' operating modes.

Defrosting Cycle

Explains the automatic defrosting cycle for heating modes.

Upkeep and Maintenance

Winterizing Procedure

Procedure for preparing the heat pump for winter shutdown.

Technical Inspections

Details annual inspections by qualified technicians.

Spare Parts Information

Information on the availability of spare parts.

Error Messages

Troubleshooting