Need help?Do you have a question about the BWT FI CONNECT EF 55 and is the answer not in the manual?
Outlines harmonised standards and the BWT Group's declaration of product compliance.
Information on the proper processing and disposal of electronic appliances.
Essential safety information and handling advice for R290 coolant.
Critical guidelines for safe electrical connections and installation.
Guidance on selecting suitable placement and required clearances for the heat pump.
List of locations and conditions to avoid when installing the heat pump.
Recommendations for minimizing operational noise and its impact.
How to properly mount and secure the heat pump on a stable base.
Standards for water quality and specifications for connecting the hydraulic piping.
Instructions for connecting and managing condensate water evacuation.
Key requirements for connecting the heat pump to the electrical mains.
Mandatory rules and precautions for safe electrical system installation.
Guidelines for selecting appropriate cable lengths and wire sizes for power supply.
How to integrate the heat pump with home automation systems via low-voltage terminals.
Steps and wiring details for enabling heating priority with the filtration pump.
Essential checks to perform before powering on the heat pump.
Detailed instructions for safely starting the heat pump operation.
Advice on using pool covers to minimize heat loss during operation.
How to adjust water flow via the bypass valve for optimal performance.
Understanding normal and abnormal pressure readings for correct operation.
Guidance on how frequently water flow settings should be checked and adjusted.
Specifications for chlorine concentration and pH levels for optimal performance.
Procedures for bringing the pool water to the desired temperature at the start of the season.
How daily filtration time impacts heat pump operation and temperature maintenance.
The critical importance of using pool covers to reduce energy consumption.
Overview of the home screen, status indicators, and basic navigation.
How to choose operating modes, set desired temperatures, and configure timers.
Adjusting display brightness, language, and other user interface preferences.
How to interpret error messages and view system operating parameters.
Instructions for obtaining and setting up the BWT Home mobile application.
Exploring the app's capabilities for remote monitoring and control of the heat pump.
Using the mobile app to remotely set the desired swimming pool temperature.
Detailed explanations of status codes displayed by the controller.
Solutions and actions for resolving identified controller and system errors.
Tasks to perform monthly to ensure optimal heat pump performance and longevity.
Key checks and cleaning actions recommended for yearly maintenance.
A step-by-step guide to properly prepare the heat pump for the off-season.
Guidelines for responsible recycling and disposal of the heat pump at its end of life.
Key details required when contacting technical support for troubleshooting.
Important notice regarding warranty terms and conditions.
Outlines harmonised standards and the BWT Group's declaration of product compliance.
Information on the proper processing and disposal of electronic appliances.
Essential safety information and handling advice for R290 coolant.
Critical guidelines for safe electrical connections and installation.
Guidance on selecting suitable placement and required clearances for the heat pump.
List of locations and conditions to avoid when installing the heat pump.
Recommendations for minimizing operational noise and its impact.
How to properly mount and secure the heat pump on a stable base.
Standards for water quality and specifications for connecting the hydraulic piping.
Instructions for connecting and managing condensate water evacuation.
Key requirements for connecting the heat pump to the electrical mains.
Mandatory rules and precautions for safe electrical system installation.
Guidelines for selecting appropriate cable lengths and wire sizes for power supply.
How to integrate the heat pump with home automation systems via low-voltage terminals.
Steps and wiring details for enabling heating priority with the filtration pump.
Essential checks to perform before powering on the heat pump.
Detailed instructions for safely starting the heat pump operation.
Advice on using pool covers to minimize heat loss during operation.
How to adjust water flow via the bypass valve for optimal performance.
Understanding normal and abnormal pressure readings for correct operation.
Guidance on how frequently water flow settings should be checked and adjusted.
Specifications for chlorine concentration and pH levels for optimal performance.
Procedures for bringing the pool water to the desired temperature at the start of the season.
How daily filtration time impacts heat pump operation and temperature maintenance.
The critical importance of using pool covers to reduce energy consumption.
Overview of the home screen, status indicators, and basic navigation.
How to choose operating modes, set desired temperatures, and configure timers.
Adjusting display brightness, language, and other user interface preferences.
How to interpret error messages and view system operating parameters.
Instructions for obtaining and setting up the BWT Home mobile application.
Exploring the app's capabilities for remote monitoring and control of the heat pump.
Using the mobile app to remotely set the desired swimming pool temperature.
Detailed explanations of status codes displayed by the controller.
Solutions and actions for resolving identified controller and system errors.
Tasks to perform monthly to ensure optimal heat pump performance and longevity.
Key checks and cleaning actions recommended for yearly maintenance.
A step-by-step guide to properly prepare the heat pump for the off-season.
Guidelines for responsible recycling and disposal of the heat pump at its end of life.
Key details required when contacting technical support for troubleshooting.
Important notice regarding warranty terms and conditions.
To Next Page
General
