What to do if my BWT Heat Pump has an electronic/overheating problem?
If your BWT Heat Pump is experiencing an electronic or overheating issue, switch off the power supply to the machine for 5 to 10 minutes. Ensure that the unit is properly ventilated and that the airflow is not blocked or impeded. After this, re-energize the machine.
Guidance on choosing the optimal location for the heat pump installation.
Details on physically installing the unit and connecting it to the pool's hydraulic system.
Overview of the control panel, operating types, and modes for heat pump management.
Instructions for setting temperature, time, parameters, and the heat pump start-up process.
Steps to connect your smartphone to the heat pump via WiFi and set up the application.
Guide on operating the heat pump functions through the dedicated smartphone application.
Regular tasks for cleaning, checking connections, and ensuring proper operation of the heat pump.
Instructions for safely stopping the heat pump and preparing it for winter or extended periods of non-use.
Explanation of display codes and recommended actions for common error and fault messages.
Guidance on choosing the optimal location for the heat pump installation.
Details on physically installing the unit and connecting it to the pool's hydraulic system.
Overview of the control panel, operating types, and modes for heat pump management.
Instructions for setting temperature, time, parameters, and the heat pump start-up process.
Steps to connect your smartphone to the heat pump via WiFi and set up the application.
Guide on operating the heat pump functions through the dedicated smartphone application.
Regular tasks for cleaning, checking connections, and ensuring proper operation of the heat pump.
Instructions for safely stopping the heat pump and preparing it for winter or extended periods of non-use.
Explanation of display codes and recommended actions for common error and fault messages.
To Next Page
General
