BWT Multi C Series User Manual

GB
1717
1717
17
Refill and replace BewasorbRefill and replace Bewasorb
Refill and replace BewasorbRefill and replace Bewasorb
Refill and replace Bewasorb
Disconnect the BWT Multi from the water supply system.
Unscrew the control valve from the pressure tank.
Screw on the control valve.
Reconnect the BWT Multi to the water supply system.
Carry out backwashing (see initial start-up).Carry out backwashing (see initial start-up).
Carry out backwashing (see initial start-up).Carry out backwashing (see initial start-up).
Carry out backwashing (see initial start-up).
BWT Multi is ready for use again.
Fill in Bewasorb
Cover central tube. Do not fill Bewasorb in central tube!Cover central tube. Do not fill Bewasorb in central tube!
Cover central tube. Do not fill Bewasorb in central tube!Cover central tube. Do not fill Bewasorb in central tube!
Cover central tube. Do not fill Bewasorb in central tube!
Freeboard
XX
XX
X : Multi 1000 C 140 mm
Multi 2000 C 235 mm
Multi 3000 C 300 mm
Use the enclosed o-ring lubricant.
XX
XX
X
123456789012345678901234
1
2345678901234567890123
4
1
2345678901234567890123
4
1
2345678901234567890123
4
1
2345678901234567890123
4
1
2345678901234567890123
4
1
2345678901234567890123
4
1
2345678901234567890123
4
1
2345678901234567890123
4
1
2345678901234567890123
4
1
2345678901234567890123
4
1
2345678901234567890123
4
123456789012345678901234

BWT Multi C Series Specifications

General

Brand	BWT
Model	Multi C Series
Category	Water Filtration Systems
Language	English