To Next Page

To Previous Page

1515

GBGB

SetSet

SetPress

SL 1SL 1

SL 1

Wait 10 sec. Dots stop flashing.

The pressure appears in the display

0.0 P0.0 P

0.0 P, when no water is used.

A third filter must be set to

SL 2SL 2

SL 2 and a fourth to

SL 3SL 3

SL 3.

Disconnect and reconnect all filters to the mains.

The filters will be backwashed in sequence:

MasterMaster

Master,

SL 1SL 1

SL 1,

SL 2 SL 2

SL 2 and

SL 3SL 3

SL 3.

The

time until the next backwashingtime until the next backwashing

time until the next backwashing and the

pres-pres-

pres-

sure differencesure difference

sure difference appear alternately in the master

filter display. The pressure difference is only dis-

played for large volumes of water.

Only the pressure differenceOnly the pressure difference

Only the pressure difference appears in the slave

filter display.

The filters are ready for use.

OperationOperation

Operation

We recommend programming the filter so that theWe recommend programming the filter so that the

We recommend programming the filter so that the

device is backwashed at least once a month todevice is backwashed at least once a month to

device is backwashed at least once a month to

prevent foreign particles from adhering to the fil-prevent foreign particles from adhering to the fil-

prevent foreign particles from adhering to the fil-

ter element (more frequently for higher levels ofter element (more frequently for higher levels of

ter element (more frequently for higher levels of

soiling; factory setting every 7 days).soiling; factory setting every 7 days).

soiling; factory setting every 7 days).

Setting the backwash intervalSetting the backwash interval

Setting the backwash interval

Should the local water quality (degree of contami-

nation) change, the backwashing interval must be

corrected; see commissioning.

Manual backwashingManual backwashing

Manual backwashing

Unplugging and plugging in the device can back-

wash it at any time.

DisplayDisplay

Display

The time until the next backwashing and the pres-

sure difference appear alternately in the display.

The pressure difference is only displayed for large

volumes of water.

CleaningCleaning

Cleaning

Clean plastic parts with a soft, damp cloth only; do

not use solvents, detergents, or acidic cleaning

agents.

SetSet

Set

Brand	BWT
Model	Multipur AP Series
Category	Water Filtration Systems
Language	English

BWT Multipur AP Series User Manual

Table of Contents

Questions and Answers:

BWT Multipur AP Series Specifications

Related product manuals